OZGUL 60 CBM

Achteras 1: Max. aslast: 0 kg; Bandenprofiel linksbuiten: 100%; Bandenprofiel rechtsbuiten: 100%
Achteras 2: Max. aslast: 0 kg; Bandenprofiel linksbuiten: 100%; Bandenprofiel rechtsbuiten: 100%
Achteras 3: Max. aslast: 0 kg; Bandenprofiel linksbuiten: 100%; Bandenprofiel rechtsbuiten: 100%
Achteras 4: Max. aslast: 0 kg; Bandenprofiel linksbuiten: 100%; Bandenprofiel rechtsbuiten: 100%

Description

3x NEW 60 M3 ROCK TYPE TIPPER SEMI TRAILER FOR SALE

Products Definition : 60 M3 Rock type tipper semi-trailer

– Wheel Height : 1350 mm
– Total length : 11100 mm
– Case internal length top : 10500 mm
– Case internal length bottom : 9700 mm
– Total width : 3450 mm
– Case internal width : 2840 mm
– Total height : 3800 mm +- 100mm
– Case internal height : 2200 mm
– Axles group technical capacity : 64000 kg
– King pin technical capacity : 14000 kg
– Vehicle total technical capacity : 78000 kg
– Empty weight : 16000 kg
– Permissible Payload : 70000 kg
– Chassis Welding : Arc submerged
– Upper structure : Robot welding

Chassis
Heavy duty and extra durability designed I beam main chassis; Opting for high tensile steel ST 52.3 A welded by automatic Submerged-Arc processes.
– Top Flange 20 mm, width 150mm;
– Middle Flange 10 mm, Height 500mm,
– Bottom Flange 20 mm, width 150mm.

Goose neck area chassis
Top Flange 20 mm, width 150mm;
Middle Flange 10 mm, Height 180mm,
Bottom Flange 20mm,width 150mm
Space between both chassis 1600 cm. goose neck side steel covered up to landing gear area.

Case
– Volume: 60 cbm
– Floor plate: HB 450 Thickness 8mm
– Side walls plate: HB 450 Thickness 6mm
– Front wall: HB 450 Thickness 6mm
– Read door: HB 450 Thickness 6mm
– Luggage front wall; HB 450 Thickness 6mm
– Tipper body corner 8mm HB 450 50×50 cm steel for whole length

Shape of tipper
Shape of the tipper body is rock type. Rear door of the dumper will be covered and operating with manual operating system bottom to up side door made with U type profile.

Cylinder(Lift)
Five stages are hard chromed, working pressure,170 bar, maximum working pressure is:190 bar, all cylinder materials are ST 52 cold drawn big lift code no: GHS 197-5-5550 C .(hidromas brand Turkish) Tipping angle degree is minimum 45 degree. / all tipping kits included, you will mount on your truck pto and pump.

– Pump : no
– Oil tank : 150 ltr loading capacity oil tank
– Axles : 3 x 16 Ton axles with mechanical spring suspensions
Upper slung type / Drum brakes 1×16 ton air suspensions, first axle is lifting type
– Tires : 17x13R22.5
– Rims : 17×9.00×22.5
– Suspensions : 16 lines leaf spring with 12mm x100mm / first axle is air suspensions
– Brake system : Wabco ABS all wheels (Adr adapted)
– Brake chambers:
2 axles with 4 units T30/30 emergency brake chambers
2 axles with 2 units T30 service brake chambers

Landing Gear
Front: Jack feet are telescopic, parallel working, double speed jointed with wide shoes static 50 tons, dynamic 25 tons capacity.

King Pin
2 + 3.5 inch king pin detachable from below made by SAE standards 8 bolt type.



Accessories
Front top has baggage for tent place.
2 x Mudguards which covers tires belongs to rear axle group metal end part plastic
1 x 60 lt plastic water tank
1 x Wheel chocks and holders
1 x Metal tool box
1 x Spare Wheel carrier with 1 tire
2 x Aluminum side protections
1 x Metal ladder front right
1 x Metal ladder rear right side
1 x Rear bumper square and removable type
2 x 7 Rubber under tipper, On chassis. Reflective tape and reflector sign at the rear and sides

Painting
Before the painting, surface and accessories are made smooth and then cleaned with a mixture of water and chemicals. Sand blasting to SA 2.5, primer 2 coats, thickness of 50 microns; upper coat 60 microns of acrylic paint.
Chassis :RAL 7021 Grey , Body: RAL 9016 White.